NCC 2019 Volume One Amendment 1
Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c

Filter

Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c
NSW Subsection J(A) Energy efficiency — Class 2 building and Class 4 parts

NSW Subsection J(A) Energy efficiency — Class 2 building and Class 4 parts

Performance Requirements

NSW J(A)P1

(a)

Thermal insulation in a building must be installed in a manner and have characteristics, which facilitate the efficient use of energy for artificial heating and cooling.

(b)

A building must have, to the degree necessary, thermal breaks installed between the framing and external cladding, to facilitate efficient thermal performance of the building envelope.

Application

Application:
  1. NSW J(A)P1(a) only applies to thermal insulation in a Class 2 building or Class 4 part of a building where a development consent specifies that the insulation is to be provided as part of the development.
  2. In (a), the term development consent has the meaning given by the Environmental Planning and Assessment Act 1979.
  3. NSW J(A)P1(b) only applies to a metal framed roof and a metal framed wall.

NSW J(A)P2

A building must have, to the degree necessary, a level of building sealing against air leakage to facilitate the efficient use of energy for artificial heating and cooling appropriate to—

(a)

the function and use of the building; and

(b)

the internal environment; and

(c)

the geographic location of the building.

Application

Application:

NSW J(A)P2 only applies to a Class 2 building or Class 4 part of a building, except—

  1. a building in climate zones 2 and 5 where the only means of air-conditioning is by using an evaporative cooler; and
  2. a permanent building opening in a space where a gas appliance is located, that is necessary for the safe operation of a gas appliance; and
  3. parts that cannot be fully enclosed

NSW J(A)P3

A building’s services must have features that, to the degree necessary, facilitate the efficient use of energy appropriate to—

(a)

the function and use of the service; and

(b)

the internal environment; and

(c)

the geographic location of the building; and

(d)

the energy source of the service.

Application

Application:

NSW J(A)P3 only applies to a Class 2 building or Class 4 part of a building.

NSW J(A)V1 Building sealing

Compliance with NSW J(A)P2 is verified when a building envelope is sealed in accordance with JV4 of the national provisions.