NCC 2019 Volume Three Amendment 1
Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c

Filter

Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c
List of Amendments - NCC 2019 - Volume Three Amendment 1

List of Amendments - NCC 2019 - Volume Three Amendment 1

This list has been prepared by the Australian Building Codes Board to assist National Construction Code (NCC) users in identifying changes incorporated in Amendment 1 to the 2019 edition of NCC Volume Three.

The notes provide a description of major changes made from the previous edition of Volume Three.

While the Australian Building Codes Board has attempted to include all major changes made from the previous edition of Volume Three, the Board does not give any warranty nor accept any liability in relation to the contents of this list of amendments.

List of Amendments

Reference

Changes and Commentary

A2.2(4)

A new sub-clause has been added to require a process be followed when undertaking a Performance Solution.

A5.7

A new provision has been added to require labelling of Aluminium Composite Panels.

Schedule 2

An abbreviation, 'ACP', has been added for Aluminium Composite Panel.

Schedule 3

A defined term, 'Aluminium Composite Panel (ACP)', has been added.

Schedule 3

The defined term 'Performance-based design brief (PBDB)' has been amended on account of the introduction of A2.2(4).

Schedule 4

The 2019 edition of SA TS 5344 'Permanent labelling for Aluminium Composite Panel (ACP) products' has been referenced.